4M Diameter big circle ground rotate fountain fireworks machine
This big circle is mainly used on wedding celebration. The diameter have 3 meter and 4 meters.
Big Circle installation:
1. First place the 12 iron poles of the circle in order of 1-12.
2. Then screw on the screws (do not tighten them first), 2 on 3, 3 on 4, and so on. After the 12 rods are aligned, tighten all the screws.
3. Put five chassis and the main machine, and the distance between the chassis and the main machine is 2 meters. Put the right circle on the chassis, open the pressure wheel (small wheel) on the main machine, put the circle in, and turn the circle by hand to see if the five chassis are inverted. After the chassis is adjusted properly, turn on the power, press the remote control key B to start the circle rotation, and tighten the screw with the inner corner wrench until the circle rotation does not slip.
Technical Parameter:
Control mode: Wireless remote control
Feature: 360 degree big circle rotate
Frequency: 433Mhz
Material: Iron
Size: Diameters 4m
Remote distance: 100 meters
Channel: 16 cues
Special effect: Double direction
Size: 110*45*42 cm
Weight: 43 Kg
