4 channel with one receiver remote control fireworks firing system
1. Install 4pcs No. 5 AA batteries into the receiver box, turn on the main switch of the igniter, all indicator lights are on, and the power supply is normal; Check that the brightness of each lamp is consistent. If any lamp is particularly bright or not, it indicates that the corresponding group has a fault and cannot be used, but it does not affect other groups;
2. Press the remote control, and the corresponding group indicator light turns off, indicating that the group is receiving normally;
3. Connect the fireworks ignition head to the igniter, and the corresponding set of indicator lights will change to light up. The ignition head connection is normal; Turn off the ignition main switch;
4. Ensure that the remote control is not pressed and the distance from the fireworks is safe. Turn on the main switch of the ignition, connect the product group indicator light, and the fireworks are connected normally;
5. Stay away from fireworks for more than 50 meters and set them off remotely.
6. Remote code checking (product cannot be connected during code checking):
a. Press and hold the button in the small hole in the center of the panel with a small stick, and the code checking indicator light above will flash. Release the stick first, then press the remote control button 1. The code checking is successful;
b. The code matching function can enable a remote control to control multiple machines;
Technical Parameter:
Control mode: 4 Button Wireless Remote Control
Frequency: 433Mhz
Feature: Can fire 3-4 pcs in series for each cue
Material: Plastic
Remote distance: 80-100 meters
Receiver Power: 6V 4pcs AA battery
Channel: 4
Size: 7*4*11 Cm
Weight: 0.2 Kg
